In this tutorial, you will learn how to set up IFROGLAB LORA GATEWAY on QNAP/ IEI

Step 1：

Please insert the plug-in from the iFrogLab LoRa USB device into the QNAP or IEI device, make sure the device is in the same internet environment as your PC.

iFrogLab LoRa can work under 3 LoRa device

1. iFrog LoRa IL-LoRa1272 and USB to port
2. iFrog LoRa node and USB to serial
3. liFrog LoRa USB

   

   

Step 2：

Install  Qfinder

Step 3：

Open Qfinder，and click your device on the network list to open the Admin back-end qts system step

Step 4：

Log in QTS，make sure the default username and password are both “admin”

Step 5：

Click App enter in QTS , search and download  “Container Station”

Step 6：

• Open“Container Station” > click  “Build Container” >  enter “ifroglab” on search bar >download  iFrogLab LoRa Gateway Container 
• Or you can download in SSH command $ docker pull ifroglab/loragateway:latest

  

Step 7：

Install SSH software on your PC

• Windows PuTTY
• Mac terminal
• Linux terminal

  

Step 8：

Open SSH or PuTTY，Open QNAP or iEi device IP address 192.168.0.110

The default username and password of QNAP QTS are both “admin”

Step 9：

Check Lora USB or USB to serial Linux driver is working correctly

$ ls  /dev/tty*

if working, you should get:

/ dev / ttyAMC0

/ dev / ttyUSB0

Step 10：

Execute LoRa gateway thoght below command

$ docker run -p 82:80 -p 3306:3306 –device=/dev/ttyACM0 -i -t ifroglab/loragateway:latest /loragateway.sh

or

$ docker run -p 82:80 -p 3306:3306 –device=/dev/ttyACM0 -i -t ifroglab/loragateway:latest /loragateway.sh

• Change “/ dev / ttyACM0” to the device name of step 10.
• 82:80 is the front-end website port number 82.

Step 11：

Open the browser and link to http://QNAP IP address:82 (for example, http:///192.168.0.110:82)

success!

For LoRaNode, see LoRaNode Tutorial

any question about the iFrogLab, welcome to write email Supports@Looptek.com

More information :

QNAP IoT blog : https://qiot.qnap.com/blog/en